Rohde & Schwarz SMW-K144 - Page 46

5G New Radio Configuration and Settings
R&S
®
SMW-K144
46User Manual 1178.8013.02 ─ 06
Remote command:
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:SSPBch<st0>:MIB:STATe
on page 177
Dummy Content
Available for "Dummy Content for MIB > On".
Channel Coding ← Dummy Content
Enables PBCH channel coding.
Remote command:
[:SOURce<hw>]:BB:NR5G:NODE:CELL<ch0>:SSPBch<st0>:CCODing:STATe
on page 176
Transport Block Size ← Dummy Content
Indicates the transport block size.
Data Source ← Dummy Content
Selects the PBCH data source.
The following standard data sources are available:
●
"All 0, All 1"
An internally generated sequence containing 0 data or 1 data.
●
"PNxx"
An internally generated pseudo-random noise sequence.
●
"Pattern"
An internally generated sequence according to a bit pattern.
Use the "Pattern" box to define the bit pattern.
●
"Data List/Select DList"
A binary data from a data list, internally or externally generated.
Select "Select DList" to access the standard "Select List" dialog.
– Select the "Select Data List > navigate to the list file *.dm_iqd > Select" to
select an existing data list.
– Use the "New" and "Edit" functions to create internally new data list or to edit
an existing one.
Node Settings