7—Project and Drive Operations
108 www.Roland.com Roland VS-2000 Owner’s Manual
Splitting a Project
1. Load the project you want to split (Page 101).
2. Hold down SHIFT and press F1 (PROJECT).
3. If “SPLIT” isn’t visible above F3, press PAGE until it is.
4. Press F3 (SPLIT)—the VS-2000 first SPLIT screen appears.
You can mark V-Tracks on SPLIT’s V-Track MAP screen—shown above—or on its
Select Track screen. You can mark as many V-Tracks as you want on either screen.
In the map of the project’s V-Tracks, any V-Track that contains data appears as a
small black box with a checkbox to its left.
5. To select a V-Track, cursor to it and press F4 (MARK) to check its checkbox; to
unselect it, press F4 (MARK) again. You can select and unselect all of the V-Tracks in
the map at once by repeatedly pressing F3 (ALL).
6. If you prefer to work on the Select Track screen, press F1 (SelTrk).
7. To select a V-Track for export on the Select Track screen, turn the Time/Value dial to
highlight the V-Track and press F4 (MARK) to place a checkmark next it.
8. When you’ve selected all of the desired V-Tracks, press F5 (OK). The VS-2000 asks:
9. Press ENTER/YES to proceed, or EXIT/NO to cancel the operation.
10. If you pressed ENTER/YES, the VS-2000 asks if you want to save recent changes to
the currently loaded project before proceeding.
11. Press ENTER/YES to save the project’s recent changes before performing the split,
or EXIT/NO to skip directly to splitting the project.
SPLIT cannot be reversed using the VS-2000’s Undo feature—V-Tracks removed from a
project can returned to it only by using the region IMPORT feature. See Page 269.
Project SPLIT uses very little additional space on your hard drive since it’s essentially
moving data from the original project to the new one, not creating new data.
To quickly select or unselect one track’s entire set of V-Tracks, cursor all the way to the
left so that the track’s name is highlighted and press F4 (MARK).
Hold down SHIFT as you turn the Time/Value dial to jump between same-numbered
V-Tracks on different tracks.
PROJECT menu
F3 (SPLIT)
VS2000OMUS.book 108 ページ ２００４年１０月２０日 水曜日 午後３時３分
To Next Page
Loading...
