26—Automix
Roland VS-2000 Owner’s Manual www.RolandUS.com 347
Editing Automix Data
Automix Editing Concepts
The AUTOMIX EDIT Screen
Automix editing takes place on the AUTOMIX EDIT screen. To get there:
1. While holding down SHIFT, press AUTOMIX.
2. Press F1 (EDIT)—the AUTOMIX EDIT screen appears.
The AUTOMIX EDIT screen presents a playlist that shows the currently targeted
Automix data—we’ll explain targeting on the next page. Familiar Home screen tools
appear at the top of the screen (Chapter 8). Edit-related F buttons are visible beneath
the playlist. You can zoom in and out as desired.
Targeting Automix Data
Automix can record and play back more data than can possibly fit onscreen at once.
Targeting allows you to select the Automix data and tracks you want to see and edit.
1. On the AUTOMIX EDIT screen, press F1 (TARGET)—
the TARGET SELECT window appears.
2. Turn the TIME VALUE dial to highlight the desired
target data.
3. Press ENTER/YES to select the new target data, or EXIT/NO to return to the
AUTOMIX EDIT screen without changing the targeted Automix data.
4. If you pressed ENTER/YES in Step 3, the newly targeted Automix tracks and data
appear in the playlist.
When you select a target, you choose both the desired
Automix track and the parameter whose Automix data
you want to edit.
Automix playlist
Currently
targeted
Automix data
When you cursor
to an Automix
track, and arrow
appears to its
left.
VS2000OMUS.book 347 ページ ２００４年１０月２０日 水曜日 午後３時３分
To Next Page
Loading...
