24—Using the Rhythm Track
Roland VS-2000 Owner’s Manual www.RolandUS.com 309
Selecting, Editing and Creating a Rhythm Arrange
Selecting a Rhythm Arrange
To select a rhythm arrange:
1. Press RHYTHM TRACK to display the RHYTHM TRACK screen.
2. Cursor to the SELECT RHYTHM ARRANGE area and set Group to the type of
rhythm arrange you wish to use: preset, user or project.
3. Select No. (to the right of Group) and turn the Time/Value dial to select the desired
rhythm arrange. The select rhythm arrange’s name appears just below the Group
and No. parameters.
Creating or Editing a Rhythm Arrange
Creating and editing a rhythm arrange are really the same process, since you always
start with the currently selected rhythm arrange
Temporary Rhythm Arrange Memory
When you modify a rhythm arrange, it’s automatically copied into a special area of
temporary memory within the VS-2000. Any changes to make to the rhythm arrange are
made to this copy. Its name changes to “TEMP” to show this. When you’re satisfied with
your work, save the rhythm arrange in the user or project Rhythm Track memory.
1. Press RHYTHM TRACK to display the RHYTHM TRACK screen.
2. To create a new rhythm arrange from scratch, select USER 1—Empty Arrange.
Otherwise, select the rhythm arrange you wish to edit.
3. Press F2 (EDIT) to display the RHYTHM ARRANGE EDIT screen.
4. If you’re creating a new rhythm arrange, press
to highlight MEASURE in the
ARRANGE EDIT area and turn the Time/Value dial to Measure 1. If you’re editing a
rhythm arrange, select a measure whose rhythm pattern you wish to change.
5. Press
to highlight the Group parameter and select the type of pattern you wish
to use at Measure 1.
When you’ve turned on the Rhythm Track and are playing project, you can revisit this
screen to see the name of the currently playing pattern in the Now Playing PATTERN
area.
Once you begin editing an existing rhythm arrange, the VS-2000 holds it in a special
temporary memory area—the display shows “TEMP” at the front of the rhythm
arrange’s name. To avoid losing your work, save the rhythm arrange to user or project
memory before selecting a different rhythm arrange or turning off the VS-2000. See
“Saving a Rhythm Arrange” on Page 311.
ARRANGE EDIT
area
RHYTHM PATTERN
area
VS2000OMUS.book 309 ページ ２００４年１０月２０日 水曜日 午後３時３分
To Next Page
Loading...
Need help?
General
