EasyManua.ls Logo

Roland VS-2000 - Where Editing Takes Place

Roland VS-2000
444 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18—Editing Tracks
Roland VS-2000 Owner’s Manual www.RolandUS.com 239
Where Editing Takes Place
You’ll edit tracks on the VS-2000’s Home screen—see Chapter 8—or on the wave
display, described below. Each screen offers a different view of a project’s audio.
The Wave Display
The wave display is a companion to the Home screen’s playlist and can be opened
whenever the Home screen is visible.
To open and close the wave display:
1. Press HOME.
2. Hold down SHIFT and press F5 (WAVE)—the wave display fills
the bottom of the screen, with the upper part of the Home
screen and its F buttons still visible.
3. To close the wave display, hold down SHIFT and press F5 (WAVE) again—the lower
portion of the Home screen reappears.
The wave display provides a highly magnified view of a track’s audio in which you can
often literally see the audio event you’re looking for. The waveform in the display is the
track’s audio interpreted in graph form. The graph’s vertical axis represents volume, or
“amplitude. Its horizontal axis represents project time.
Here’s how to get around on the wave display.
Press STOP before opening or closing the wave display.
To: Do this:
view the desired track Use the
and
buttons.
zoom in or out vertically Hold down SHIFT and press
or
, respectively
zoom in or out horizontally Hold down SHIFT and press
or
, respectively
The track that’s currently selected for editing remains selected as you scroll through—
and view—different tracks in the wave display. You can see the name of the currently
selected track in the top left corner of the display, a portion of the Home screen that’s
still visible. The wave display itself tells you which track you’re viewing there.
By combining different vertical and horizontal zoom settings, you can view the selected
track’s audio with almost any degree of detail. You can also hold down SHIFT and press
HOME to toggle on and off a full-screen view of the wave display.
+
Track name
Vertical
magnification
Phrase name
Horizontal
magnification
Track
number
Position bar
Now line
VS2000OMUS.book 239 ページ 2004年10月20日 水曜日 午後3時3分

Table of Contents

Other manuals for Roland VS-2000

Related product manuals