Roland VS-2000 - The TRACK;STATUS Buttons in Chrd Mode, Cont

25—Harmony
334 www.Roland.com Roland VS-2000 Owner’s Manual
The TRACK/STATUS Buttons in Chrd Mode, con’t.
TRACK/STATUS button #: Harmony Name: What it Does:
4 Legato When Legato is lit, the last-entered
chord continues sounding until
another chord is entered.
5C When both Oct buttons are lit, press
C to create chord rooted on Middle
C. Otherwise, the button plays a C
chord in the selected octave.
6D When both Oct buttons are lit, press
D to create a chord rooted on the D
just above Middle C. Otherwise, the
button plays a D chord in the
selected octave.
7E When both Oct buttons are lit, press
E to create a chord rooted on the E
just above Middle C. Otherwise, the
button plays an E chord in the
selected octave.
8F When both Oct buttons are lit, press
F to create a chord rooted on the F
just above Middle C. Otherwise, the
button plays an F chord in the
selected octave.
9G When both Oct buttons are lit, press
G to create a chord rooted on the G
just above Middle C. Otherwise, the
button plays a G chord in the
selected octave.
10 A When both Oct buttons are lit, press
A to create a chord rooted on the A
just above Middle C. Otherwise, the
button plays aa A chord in the
selected octave.
11 B When both Oct buttons are lit, press
B to create a chord rooted on the B
just above Middle C. Otherwise, the
button plays a B chord in the selected
octave.
12 b/# • Press b/# once —it lights red and
changes the TRACK/STATUS
buttons so they play Cb-Bb-
rooted chords.
• Press b/# twice —it lights green
and changes the TRACK/
STATUS buttons so they play C#-
B#-rooted chords.
VS2000OMUS.book 334 ページ ２００４年１０月２０日 水曜日 午後３時３分