2—Getting Around
44 www.Roland.com Roland VS-2000 Owner’s Manual
Navigation Tools
This area contains frequently used controls that are part of many VS-2000 operations.
1—CLEAR Button
To delete a locator, marker or scene, hold down CLEAR and press the desired locator or
scene (Page 142) TRACK/STATUS button. To clear an edit point, hold down SHIFT and
CLEAR and press the desired IN, OUT, FROM or TO button. To delete an Auto Punch point,
hold down A.PUNCH and CLEAR and press the desired IN or OUT button. To clear a loop
point, hold down LOOP and CLEAR and press the desired FROM or TO button.
2—
(Cursor)/ZOOM Buttons
Press the
,
,
or
cursor buttons to move the selection cursor (Page 67) around
the VS-2000’s display. Also, hold down SHIFT and press the desired arrow button to
zoom in and out on track data shown onscreen (Page 123):
• Press
to increase the horizontal magnification.
• Press
to decrease the horizontal magnification.
• Press
to increase the vertical magnification.
• Press
to decrease the vertical magnification.
3—SCRUB Button
When you need to precisely locate a moment in a track, press SCRUB to activate the
Scrub feature. When SCRUB is lit, you can turn the Time/Value dial to move the now
line and listen to a tiny piece of the track play over and over—this lets you zero in on
just the moment you’re looking for. This can be very helpful when editing. To turn off
scrubbing, press SCRUB again so its light goes out. See Page 181 to learn more.
1
2
10
6
7
9
8
11
12
15
16
34 5
13
14
VS2000OMUS.book 44 ページ ２００４年１０月２０日 水曜日 午後３時３分
To Next Page
Loading...
