Roland VS-2000 User Manual

22—EZ Routing
Roland VS-2000 Owner’s Manual www.RolandUS.com 281
The Type of Settings a Template Contains
An EZ Routing template remembers everything that pertains to routing and
configuration-related parameters—including input channel, track channel and Aux bus
linking, V-Track selection and the current settings of the hard disk recorder’s TRACK/
STATUS buttons.
Saving an EZ Routing Template
1. Set up your VS-2000 as desired.
2. Press EZ ROUTING.
3. If “SAVE” isn’t visible above F6, press PAGE until it is.
4. Press F6 (SAVE)—the EZ ROUTING TEMPLATE SAVE screen appears.
5. Turn the Time/Value dial to select the desired user template memory location.
6. Press F1 (NAME) to name the template you’re saving. See Page 74 to learn about
naming. If you’d don’t want to name the new template, skip this step.
7. When you’re ready to finish saving the template, press F5 (OK), or press F6 (EXIT)
to cancel the operation.
8. Press ENTER/YES to save the template, or EXIT/NO to cancel the operation.
VS2000OMUS.book 281 ページ ２００４年１０月２０日 水曜日 午後３時３分

Roland VS-2000 Specifications

General

Type	Digital Audio Workstation
A/D/A Conversion	24-bit
MIDI	MIDI In/Out
Simultaneous Recording Tracks	8
Sampling Frequency	44.1kHz, 48kHz
Effects	Built-in effects including reverb, delay, chorus, and more
Inputs	8 XLR/TRS combo inputs, 2 RCA inputs
Outputs	2 RCA outputs, headphone output
Storage	Internal hard drive (40GB), optional CD-RW drive
Display	LCD