Roland VS-2000 - Display Area

2—Getting Around
Roland VS-2000 Owner’s Manual www.RolandUS.com 39
Display Area
The LCD display and its buttons are central to everything you do on the VS-2000. The F
buttons discussed in Chapter 4, on Page 68.
1—LCD Display
The LCD display is your window to the VS-2000’s operations. In addition to providing
you vital information, the display is central to all VS-2000 activity.
2—PAGE Button
Some activities on the VS-2000 require more than a single screenful of settings—each
screenful is called a “page.” For such activities, you can repeatedly press the PAGE
button to cycle through the available pages.
3—F Buttons 1-6
The F 1-6 buttons are “soft” buttons whose job changes depending on what you’re
doing. When an F button is active, its current function is shown on the display above
the button. For more on how the F buttons work, see Page 68.
When you purchase and install a VS20-VGA VGA/Mouse Expansion Board and add an
external VGA monitor to the VS-2000 for use as a main display, the VS-2000’s built-in
LCD provides supplemental information.
1
2
5
6
3
4
VS2000OMUS.book 39 ページ ２００４年１０月２０日 水曜日 午後３時３分