Roland VS-2000 - Exporting Phrases as Wav Files

27—Mastering and CD-R/RW Operations
Roland VS-2000 Owner’s Manual www.RolandUS.com 373
4. To select a V-Track on the V-Track Map screen, press F2 (MAP)—the TRACK
EXPORT V-Track Map screen appears.
Each V-Track with audio appears as a small black square with a checkbox to its left.
5. To select a V-Track for export, cursor to the V-Track and press F4 (MARK) to check
its checkbox. As on the Select Track screen, you can select and unselect all of the
V-Tracks at once by pressing F3 (ALL).
6. When you’ve selected all of the V-Tracks you want to export, press F5 (NEXT) to go
to the WAV Export CD burning screen, described on Page 374.
Exporting Phrases as WAV Files
1. Insert a blank CD-R or CD/RW into your CD burner.
2. On the CD-RW MASTERING MENU screen (Page 364), press F6
(PhrExp) for “Phrase Export”—the PHRASE EXPORT screen appears.
On this screen, you can select the phrases you want to export as WAV files. Every
phrase that’s currently touching the now line appears at the top of the screen in the
phrase-selection area. If a phrase you want to export isn’t available for selection,
turn the Time/Value dial so that the now line touches the phrase.
To quickly select or unselect all of a track’s V-Tracks, cursor all the way to the left so that
the track’s name is highlighted and press F4 (MARK).
Repeatedly press F4 (INFO) to display any of three types of information about the
displayed phrases: their names, dates of creation, and sizes.
F6 (PhrExp)
Phrase-
selection
area
Playlist
VS2000OMUS.book 373 ページ ２００４年１０月２０日 水曜日 午後３時３分