24—Using the Rhythm Track
312 www.Roland.com Roland VS-2000 Owner’s Manual
4. Choose a specific memory location within the selected group as the place your
rhythm arrange is to be stored. The rhythm arrange currently residing in that
location is displayed beneath the Group and No. parameters.
5. If you want to name the rhythm arrange, press F1 (NAME) and do so—see
“Naming” on Page 74 for details. After naming the rhythm arrange, press F6 (EXIT)
to return to the RHYTHM ARRANGE SAVE screen.
6. Press F5 (OK)—the VS-2000 asks you to confirm your decision to save the rhythm
arrange in the selected location.
7. Press ENTER/YES to proceed, or EXIT/NO to cancel the operation.
Rhythm Arrange Copying
You can copy a rhythm arrange to another memory location. This allows you to:
• create a safety copy of a rhythm arrange with which you want to experiment.
• copy a user rhythm arrange into a specific project.
• copy a project rhythm arrange in user memory so you can use it with other projects.
Copying a Rhythm Arrange
1. Press RHYTHM TRACK to display the RHYTHM TRACK screen.
2. If “COPY” isn’t visible above F1, press the PAGE button so it is.
3. Press F1 (COPY)—the RHYTHM ARRANGE COPY screen appears.
4. In the SOURCE RHYTHM ARRANGE area, select the desired rhythm arrange
group, and then the individual rhythm arrange you wish to copy.
5. In the DESTINATION RHYTHM ARRANGE area, select desired rhythm arrange
group, and then specific memory location in which you want to store the rhythm
arrange copy. The name of the rhythm arrange currently residing in the selected
location is displayed beneath the Group and No. parameters.
6. Press F5 (OK)—the VS-2000 asks if you’re sure. Proceeding with the operation will
replace any rhythm arrange currently residing in the selected destination location.
7. To finish copying the rhythm arrange, press ENTER/YES.
Source rhythm
arrange
Destination
rhythm arrange
VS2000OMUS.book 312 ページ ２００４年１０月２０日 水曜日 午後３時３分
To Next Page
Loading...
