25—Harmony
Roland VS-2000 Owner’s Manual www.RolandUS.com 335
The TRACK/STATUS Buttons in Chrd Mode, con’t.
TRACK/STATUS button #: Harmony Name: What it Does:
13 min/maj When Chrd is turned on, min/maj
lights. To create:
•
major chords
—press min/maj so it
lights red, and then select the
desired chord by pressing the 7/
maj7/6/9 button.
•
minor chords
—press min/maj so it
lights green, and then select the
desired chord by pressing the 7/
maj7/6/9 button.
Note: When you press sus4/aug or
dim, min/maj turns off.
14 7/maj7/6/9 7/maj7/6/9 works in conjunction with
the min/maj and sus4/aug buttons.
When min/maj is lit, press 7/maj7/6/
9 repeatedly to select the desired
major or minor chord, depending on
the current state of the min/maj
button. When 7/maj7/6/9 is:
•
off
—a plain major or minor chord
is created.
•
red
—a dominant seventh is
added to the triad.
•
flashing red
—a major seventh is
added to the triad.
•
green
—a sixth is added to the
triad.
•
amber
—a dominant ninth is
added to the triad.
When sus4/aug is lit, press
7/maj7/6/9 to add or remove a
dominant 7th to the sus4 or
augmented chord. If 7/maj7/6/9 is:
•
off
—a plain suspended 4th or
augmented chord is created.
•
red
—a dominant seventh chord is
added to the suspended 4th or
augmented chord.
15/16 sus4/aug Press sus4/aug to create a suspended
4th or augmented chord. When the
button is:
•
red
—a suspended 4th chord is
created.
•
green
—an augmented chord is
created.
17/18 dim Press dim so it lights to create a
diminished chord.
VS2000OMUS.book 335 ページ ２００４年１０月２０日 水曜日 午後３時３分
To Next Page
Loading...
