4—Setting Up and Basic Operations
Roland VS-2000 Owner’s Manual www.RolandUS.com 67
Setting the VS-2000’s Clock
The VS-2000 time-stamps your recordings to make it easier for you to keep track of your
work. Before it can do this, you’ll need to set its clock.
1. Hold down SHIFT and press F4.
2. Press the PAGE button repeatedly—if necessary—until “DATE” appears above F6.
3. Press F6 (DATE). The DATE/TIME screen appears.
4. If the DATE parameter isn’t selected, use the
,
,
and
buttons to select it.
5. If the month isn’t already selected, press
to select it.
6. Turn the Time/Value dial until the current month is displayed.
7. Press
and turn the Time/Value dial to choose today’s date.
8. Press
and turn the Time/Value dial to choose the current year.
9. Press
and turn the Time/Value dial to choose the desired DATE FORMAT setting.
Dates can be shown on the display in any of the following styles:
10. Press
to select the TIME parameter.
11. Turn the Time/Value dial to select the current hour.
12. Press
and turn the Time/Value dial to select the minute, and then second.
13. Press F5 (SET) to confirm your changes.
14. Press F6 (EXIT) to leave the DATE/TIME screen and finish the procedure.
A Few Fundamental Concepts
Selection
Before you can change something in the VS-2000, you must first select it. In the case of
physical controls, it’s obvious: before you can move a fader, you’ve got to grab it with
your fingers. This rule also applies to items shown on the VS-2000’s display. When you
select something on the display, you’re telling the VS-2000 you want to do something to
the thing you’ve selected. The two most common ways to make a selection are to use
the cursor buttons or to click the desired item with your mouse. Once you’ve made a
selection, you can make the desired change using the appropriate tool.
When you select one displayed item and then another, you’re
moving the “selection cursor.”
The VS-2000 shows you what’s currently selected. Often, the
selected item becomes “highlighted” —its colors are inverted. Text,
for example, becomes white with a dark background.
When you select a box in which you can enter data or choose a
different value, the box’s outline becomes darkened.
This value: Displays dates as:
mm/dd/yyyy 07/12/2001
dd/mm/yyyy 12/07/2001
yyyy/mm/dd 2001/07/12
MMM.dd ‘YY Jul. 12, ‘01
dd MMM ‘YY 12 Jul ‘01
The VS-2000 uses 24-hour time: Midnight is Hour 00, 1 am is 01, and 1 pm is
Hour 13.
Selected
Not selected
VS2000OMUS.book 67 ページ ２００４年１０月２０日 水曜日 午後３時３分
To Next Page
Loading...
