24—Using the Rhythm Track
Roland VS-2000 Owner’s Manual www.RolandUS.com 307
Playing a Rhythm Track
1. Press RHYTHM TRACK to display the RHYTHM TRACK screen.
2. To turn on the Rhythm Track feature, set TRACK 17/18 ASSIGN to RHYTHM—
TRACK/STATUS Button 17/18 lights green.
3. Current tempo set on tempo map will be displayed at “TEMPO.”
4. Set LEVEL as desired. Try a setting of 0.0 as start, and make fine adjustments with
Fader 17/18.
5. Select the desired drum kit by dialing it in as the DRUM KIT parameter’s value. You
can select:
•STANDARD1 • STANDARD2 • ROOM
• HEAVY • JAZZ • HIP-HOP
• HOUSE • REGGAE • 808
6. Select the desired type of rhythm arrange by setting the Group parameter to:
• PRESET • USER • PROJECT
7. Select the No. parameter and dial in the desired rhythm arrange from within the
selected group—the name of the rhythm arrange appears in the Name area.
8. Press F6 (EXIT).
9. Press CH EDIT so it lights. if it isn’t already lit.
10. Hold down CLEAR and press TRACK/STATUS Button 17/18 to set Track Channel
17/18’s level to 0.0 so you can hear the Rhythm Track.
11. Press ZERO to return to the top of the project.
12. Press PLAY to hear the Rhythm Track.
13. To watch the RHYTHM TRACK display—this step is optional—press RHYTHM
TRACK to return to the RHYTHM TRACK screen. As the project plays, the name of
the currently playing pattern appears in the Now Playing PATTERN area.
The Rhythm Track works with the project tempo map (Page 306), speeding up or
slowing down accordingly. To jump to the Tempo Map screen, press F3 (T.Map).
The Rhythm Track can play sounds in an external MIDI module if you wish. See
“Playing External Rhythm Track Sounds” on Page 321.
To work on a rhythm pattern, as described on Page 313, press F1 (Pttrn). To work on a
rhythm arrange, as described on Page 309, press F2 (Edit)
VS2000OMUS.book 307 ページ ２００４年１０月２０日 水曜日 午後３時３分
To Next Page
Loading...
