Roland VS-2000 - Mixer Area

2—Getting Around
Roland VS-2000 Owner’s Manual www.RolandUS.com 35
Mixer Area
1—INPUT Knobs 1-8
You can adjust the sensitivity of an XLR or TRS input jack by turning its INPUT knob.
Turn the knob all the way counter-clockwise for a line level or all the way clockwise for
a mic level device.
2—INPUT Buttons 1-10
The VS-2000 has 10 input channels that control the signals coming into its 10 inputs:
• Input Channels 1-8 —control signals coming into the analog XLR or 1/4” Inputs 1-8
(Page 33).
• Input Channels 9 and 10 —control stereo signals received at the VS-2000’s coaxial
stereo digital input (Page 48).
To view an input channel’s settings, press the corresponding INPUT button.
When no input signal is connected or in use, turn each input jack’s knob all the way
counter-clockwise to avoid unwanted noise, and set its FADER parameter (Page 152) to
- ∞ .
Mic level, line level, dBu
10
11
1
2
3
8
7
9
12 13 14
4
5
6
VS2000OMUS.book 35 ページ ２００４年１０月２０日 水曜日 午後３時３分