Roland VS-2000 - MIDI; Sync; Auto Punch;Loop; Marker

28—UTILITY Menu Parameters
384 www.Roland.com Roland VS-2000 Owner’s Manual
PREVIEW TO LENGTH and PREVIEW FROM LENGTH
See “Setting the PREVIEW TO and FROM Times” on Page 180.
MIDI
The VS-2000’s MIDI parameters and operations are described in Chapter 23, starting on
Page 283. See the VS-2000 Owner’s Manual index for page numbers of references.
SYNC
Synchronization parameters and operations are described starting on Page 291. See the
VS-2000 Owner’s Manual index for page numbers of specific parameter references.
AUTO PUNCH/LOOP
The AUTOPUNCH/LOOP screen provides parameters for setting
Auto Punch and Loop start and stop times. To learn about using its
parameters for:
• Auto Punch —see “Editing Auto Punch IN and OUT Points Manually” on Page 191.
• Loop —see “Editing Loop FROM and TO Points Manually” on Page 179.
MARKER
Learn how to use the UTILITY menu’s MARKER screen in “Editing
Markers” on Page 188.
UTILITY menu
F5 (MIDI)
UTILITY menu
F6 (SYNC)
UTILITY menu
F1 (A.P/LP)
UTILITY menu
F2 (MARKER)
VS2000OMUS.book 384 ページ ２００４年１０月２０日 水曜日 午後３時３分