18—Editing Tracks
Roland VS-2000 Owner’s Manual www.RolandUS.com 253
To select a phrase or region using the TRACK menu’s onscreen tools:
1. Use the cursor buttons to select the track containing the desired phrase or region.
2. Press F3 (MARK) to select the track’s phrase or region—a
checkmark appears to the track’s left to show it’s selected.
3. To unselect a track, press F3 (MARK) again—the checkmark is removed.
If the editing operation involves moving or copying audio
between tracks, you see an arrow to the right of the track you’ve
selected. This arrow points to a destination V-Track.
4. Turn the Time/Value dial to select the desired destination V-Track.
5. Repeat Steps 1-4 for any phrase or region you wish to select.
6. Press F1 (<<BACK) to return to the edit operation’s main screen, or F6 (EXIT) to
return to the TRACK PHRASE EDIT MENU or the TRACK REGION EDIT MENU.
When you’re selecting phrases, only tracks containing a phrase that’s touching the now
line can be marked. You can mark additional phrases on the other tracks by cursoring
up to the current time location display and turning the Time/Value dial to move the now
line to the desired phrases. You can then mark their tracks.
On many editing screens, you can see each track’s name. On selection screens that
allow you to choose V-Tracks, only track numbers are shown to make room.
Be careful not to select the same V-Track as a destination for more than one source.
You can use the onscreen tools together with the Quick Selection feature to jump from
one track’s currently selected V-Track to another track’s currently selected V-Track
without having to turn the Time/Value dial to get there. While the source track is
highlighted onscreen, you can press any track’s TRACK/STATUS button to make the
onscreen V-Track value jump to that track’s currently selected V-Track.
You can select or unselect all of the displayed phrase or regions at once by pressing F2
(ALL). If any phrase or regions are selected, they become unselected. If none are
selected, they all become selected. If they’re all selected, they all become unselected.
Press F2 (ALL) repeatedly to toggle selection on and off for all phrases or regions.
VS2000OMUS.book 253 ページ ２００４年１０月２０日 水曜日 午後３時３分
To Next Page
Loading...
