Roland VS-2000 - Page 406

Supplemental Information
406 www.Roland.com Roland VS-2000 Owner’s Manual
Control Change Numbers—Track Channel Parameters
TRACK/STATUS Buttons—The Effects of Control Change Values
You can change the current setting of a TRACK/STATUS button by sending Control
Change messages to the VS-2000. Tracks 1-16 respond to Control Change 35. Tracks
17-18 respond to Control Change 67. The following table shows how a TRACK/STATUS
button’s setting changes in response to various received Control Change values .
Track Channels 1-16 Track Channels 17-18
Control Change Parameter Control Change Parameter
35 TRACK/STATUS 67 TRACK/STATUS
39 Fader Level 71 Fader Level
42 Pan 74Pan
44 Aux 1 Send Level 76 Aux 1 Send Level
45 Aux 2 Send Level 77 Aux 2 Send Level
46 FX 1 Send Level 78 FX 1 Send Level
47 FX 2 Send Level 79 FX 2 Send Level
48 FX 3 Send Level 80 FX 3 Send Level
49 FX 4 Send Level 81 FX 4 Send Level
50 FX 5 Send Level 82 FX 5 Send Level
51 FX 6 Send Level 83 FX 6 Send Level
52 Aux 1/2 Send Pan 84 Aux 1/2 Send Pan
53 FX 1/2 Send Pan 85 FX 1/2 Send Pan
54 FX 3/4 Send Pan 86 FX 3/4 Send Pan
55 FX 5/6 Send Pan 87 FX 5/6 Send Pan
56 Offset Fader Level 88 Offset Fader Level
57 Offset Pan 89 Offset Pan
Values from 0-41 Values from 42-83 Values from 84-127
With the Off → same Off → Record-ready Off → Play
VS-2000 Play → Off Play → Record-ready Play → same
stopped Record-ready → Off Record-ready → same Record-ready → Play
X=ignored Values from 0-41 Values from 42-83 Values from 84-127
During Off → X Off → X Off → Play
playback & Play → Off Play → X Play → X
recording Record → X Record → X Record → X
VS2000OMUS.book 406 ページ ２００４年１０月２０日 水曜日 午後３時３分