2—Getting Around
46 www.Roland.com Roland VS-2000 Owner’s Manual
12—FF Button
Press FF (for “Fast Forward”) to move gradually forward through a project. Hold SHIFT
and press PREVIEW FROM to jump to the end of the audio recorded in the project.
13—STOP Button
Press STOP to halt playback at the now line’s current location—see Page 126.
14—PLAY Button
Press PLAY to begin playback from the current location of the now line—see Page 126. To
restart the VS-2000 during the Shutdown procedure (Page 85), hold down SHIFT and press
PLAY.
15—REC•AUTOMIX REC Button
Hold down REC•AUTOMIX REC and press PLAY to record audio (see Page 176). When
the AUTOMIX button (Page 42) is lit, hold down REC•AUTOMIX and press PLAY to
record mixer settings as realtime Automix data—see Chapter 26 (Page 341).
16—DISK/MIDI/EXT SYNC Indicator
Each of these indicators shows activity of a particular sort. When:
•
the DISK indicator lights
—the internal hard drive is being read or being written to.
•
the MIDI indicator lights
—the VS-2000 is receiving MIDI data from an external
device.
•
the EXT SYNC indicator lights
—the VS-2000’s transport is ready to be synchronized
to—and driven by—an external device.
Realtime
VS2000OMUS.book 46 ページ ２００４年１０月２０日 水曜日 午後３時３分
To Next Page
Loading...
