3—Introduction to the VS-2000
Roland VS-2000 Owner’s Manual www.RolandUS.com 53
The 10 input channels are found in the INPUT area. To view and adjust the settings for
any of these channels, press its button.
The 18 track channels are controlled by the 16 physical faders on the VS-2000. Track
Channels 1-14 have their own individual channel strips. Tracks 15 and 16 share a strip,
as do Tracks 17 and 18. The strips’ physical faders are helpful when making the precise
level adjustments required in a mix, and when automating a mix.
To view and adjust the settings for any of the six stereo FX return channels, press the
corresponding FX button for two seconds.
All of the VS-2000 channels are available and active all the time.
We’ll discuss the operation of the mixer in detail in Chapter 10, starting on Page 139.
Channel settings are described detail in Chapters 11 and 17.
Track Channel Fader 17/18 can control the VS-2000’s built-in Rhythm Track feature
instead of Tracks 17 and 18, as explained on Page 305.
The strip shown at the far right here isn’t
actually one of the track channels—it controls
the level of the MASTER mix.
VS2000OMUS.book 53 ページ ２００４年１０月２０日 水曜日 午後３時３分
To Next Page
Loading...
