Reference Manual
00809-0100-4026, Rev FA
July 2009
5-19
Rosemount 5400 Series
Restart the Transmitter
14. Restart the transmitter to activate all of the
configuration changes. It may take up to 60
seconds after the restart button is pressed
before measurement values are updated.
View Measured Values
15. Step 4 shows measurement values to verify
that the transmitter is working correctly. If the
measured values seem incorrect,
configuration settings may need to be
adjusted.
Configuration Backup
16. When configuration is complete, the
configuration should be saved to a backup
file.
This information is useful for:
- installing another 5400 in a similar tank,
since the file can be directly uploaded to a
new device.
- restoring the configuration, if configuration
data is lost or accidentally modified, making
the device inoperable.
The Configuration Report window
automatically appears when the backup is
complete.
Guided Setup Complete
17. The Guided Setup is now complete. To exit
the Guided Setup, click the Close button.
To Next Page
Loading...
