1-27
Utilities Tab Screen
The [UTILITIES] Tab Screen lets you start a manual defrost cycle, start/set manual shutdown, set schedule,
set date/time, check the software, set the TRIM thickness, turn the draft generator on/off (only when the
draft generator option has been set), and manipulate other items such as language selection, maintenance
information viewing, cooling method setting, sound setting and account setting.
The available setting buttons are limited depending on the permissions granted to the logged-on user.
The manager can perform all settings.
The user can perform all settings except for those accessed by the "Miscellaneous" button.
The Everyone user cannot press any button except for "Defrost," "TRIM Thickness" and "Draft Generator."
Refer to p. 1-49 for the details of permissions.
Defrost button
Start the defrost cycle manually (as desired). Refer to p. 2-18 for details.
Shutdown button
Start shutdown manually (as desired). Refer to p. 2-20 for details.
● Schedule button
Set scheduled instrument operation. Refer to p. 1-39 for details.
Time Setup button
Set the current date/time. Refer to p. 1-37 for details.
Software button
Use this button to display the software version or install new software. Refer to p. 1-52 for details.
TRIM Thickness button
Set the TRIM thickness (section thickness for rough shaving). Refer to p. 1-31 for details.
Draft Generator button
Turn the draft generator on/off. Refer to p. 2-34 for details.
Miscellaneous button
Press this button to perform language selection, maintenance information viewing, cooling method
setting, sound setting and account setting. Refer to p. 1-28 for details.