Sakura Tissue-Tek Polar DM User Manual

1-38
Setting the Date
1. Press the "Time Setup" button on the [UTILITIES] Tab Screen.
2. Touch the date to set in the date selection area. Use the "◄"
button to switch to the previous month, or "►" button to switch
to the next month. The settable range is January 2000 through
December 3000.
3. To proceed to the setting of time, press the "Set" button. Refer
to p. 1-38 for details.
4. Pressing the "Save" button saves the setting, after which the
display returns to the [UTILITIES] Tab Screen.
If no operation has been performed for 5 minutes, the setting is
not saved and the screen closes automatically.
Setting the Time
1. Press the "Time Setup" button on the [UTILITIES] Tab Screen.
2. Press the time display format switching button to select 24-hour
display or 12-hour display.
3. Press the "Set" button.
4. Set the hours and minutes. Press the value you want to change,
and the value will be selected and highlighted.
5. To change the hours, press the value of hours.
Press the ""/"" buttons among the "Value Change" buttons
to change the value.
In the case of 24-hour display, hours is displayed in a range of 0
to 23 and minutes, in a range of 0 to 59.
In the case of 12-hour display, hours is displayed in a range of 1
to 12 and minutes, in a range of 0 to 59, with am/pm also
shown.
6. Press the “Enter” button to return to the Set Date & Time
screen.
7. Pressing the "Save" button saves the setting, after which the
display returns to the [UTILITIES] Tab Screen.
If no operation has been performed for 5 minutes, the setting is
not saved and the screen closes automatically.
Date selection area
Currently selected date
am/pm display
Time display format switching button (24-hour/12-hour)
Set button
Currently set hours
Currently set minutes
Value change button (up/down)
Enter button

Sakura Tissue-Tek Polar DM Specifications

General

Brand	Sakura
Model	Tissue-Tek Polar DM
Category	Medical Equipment
Language	English