1-41
Various Settings
Explanation of Scheduled Operation Setting Screen
Always-on operation/scheduled operation selector button
The setting screen toggles between always-on operation and scheduled operation every time this
button is pressed.
In always-on operation, the system performs cleaning operation (defrost cycle and ozone cycle) at
specified times without stopping the cooling.
In scheduled operation, the system stops/runs and performs cleaning operation (defrost cycle and
ozone cycle) at set times.
You can select whether or not to perform the ozone disinfection cycle.
External save button
If the USB memory device is connected, you can press the "Import Button" or "Export Button" to
input/output schedule data. Note that the Everyone user cannot press these buttons. Refer to p. 1-45 for
details.
Exit button
Return to the UTILITIES tab screen.
Automatic ozone cycle check box button
If this check box is selected, the ozone cycle will be performed in the case of automatic shutdown or
after the defrost cycle.
Ready/shutdown button
Set the ready/shutdown times for a week. Refer to p. 1-42 for details.
Days off setting button
Set a day(s) off. Refer to p. 1-43 for details.
Operating day setting button
Set an operating day(s). Refer to p. 1-44 for details.
If a given day is set as both a day off and operating day, it is deemed an operating day
Always-on operation
selector button
Scheduled operation
selector button
Ready/shutdown setting
button
Operating day setting button
Automatic ozone cycle
box check button