Sartorius PR 5610 - Page 65

Commissioning PR 5610 Installation Manual
62 Sartorius
4.3.1.1 Setup menu
Setup
- Config
Menu depends on application package, see resp. operating manual
- Weighingpoints
- WP A:
- WP B:
- Assign
internal, liquid, user, GWT-Scale, x-BPIScale
- Calib (for internal ADC)
see chapter 4.3.1.2
- Config (for liquid)
- W & M
<none>, OIML, NTEP
- Fullscale
0.000100 ... <1000> ... 9999900 <kg>, t, lb, g
- Stepwidth
<1>, 2, 5, 10, 20, 50
- Overload
0 ... <9 d> ... 9999999 d
- Minwgt
<0 d> ... 9999999 d
- Scale Weight
0.000100 ...<1> ... 9999900 <kg>, t, lb, g (weight increase/x counts)
- Scale counts
<1 cnt> ... 65000 cnt
- Config (for user)
- W & M
<none>, OIML, NTEP
- Fullscale
0.000100 ... <1000> ... 9999900 <kg>, t, lb, g
- Stepwidth
<1>, 2, 5, 10, 20, 50
- Overload
0 ... <9 d> ... 9999999 d
- Minwgt
<0 d> ... 9999999 d
- Scale Weight
0.000100 ...<1> ... 9999900 <kg>, t, lb, g (weight increase/x counts)
- Scale counts
<1 cnt> ... 65000 cnt
- Update time
50 ... <300 ms> ... 2000 ms
- SPM marker address
<32> ... 255
- Config (for GWT Scale)
- W & M
<none>, OIML, NTEP
- Overload
0 ... <9 d> ... 9999999 d
- Minwgt
<0 d> ... 9999999 d
- Update time
50 ... <300 ms> ... 2000 ms
- Fieldbus slave
<1> ... 32
- Serial number
<0> if >0, check on boardl number is done
- Config (for xBPIScale)
- W & M
<none>, OIML, NTEP
- Taring
<Remote>, Local select Remote for ISI Terminal, local for platform
- Overload
0 ... <9 d> ... 9999999 d
- Minwgt
<0 d> ... 9999999 d
- Update time
50 ... <300 ms> ... 2000 ms
- Serial number
<0> if >0, check on serial number is done
- Setup (for xBPIScale)
For xBPI Setup please ref. to chapter 4.7.4
- WP C:
- Assign
<none>, A+B
- Config (for A+B)
- W & M
<none>, OIML, NTEP
- Overload
0 ... <9 d> ... 9999999 d
- Minwgt
<0 d> ... 9999999 d