Schweitzer Engineering SEL-351P - Page 138

1-42 Factory-Set Logic Date Code 990215
SEL-351P Manual Técnico
The corresponding LEDs (LED1 through LED9, respectively) are programmed independently.
This allows great flexibility, especially in indicating status for a function that is controlled both
locally and remotely.
DWG: MP351P021
TERRA
HABILITADO
RELIGAMENTO
HABILITADO
REMOTO
HABILITADO
AJUSTES
ALTERNATIVOS
BLOQUEIO
(apertar por 3 seg.)
LED
Operator
Control
Pushbutton
Relay
Word
Bit Output
SEL OGIC
Factory
Setting
Detailed
Operator
Control
Pushbutton
Output
Corresponding
LED Operation
and Logic
Application
PB1 LED1 = LT1
PB2 LED2 = LT2
PB3 LED3 = 0
(always extin-
guished from
factory)
PB4 LED4 = !SG1
= NOT (SG1)
PB5 LED5 = !LT4
= NOT (LT4)
Figure 1.33 Figure 1.37
Similar to
Figure 1.33 Figure 1.38
Similar to
Figure 1.33 Figure 1.39
Similar to
Figure 1.33 Figure 1.43
Figure 1.34 Figure 1.44
Figure SECTION 1: .31: Operator Controls – TERRA HABILITADO through
BLOQUEIO