Introduction
SEL-351P Quick-Start Installation and User's Guide (Portuguese) 1
INTRODUCTION
About This Quick-Start Installation and User's Guide
This SEL-351P Recloser Control Quick-Start Installation and User’s
Guide helps you install, communicate with, set, and test the SEL-351P in
its EZ (“easy”) mode of operation. The EZ mode performs traditional
recloser control functions and operations.
SEL designed the SEL-351P based on the SEL-351 Distribution Relay.
The SEL-351P has full SEL-351 Relay functionality together with a
modified user interface designed for recloser control. When using the
SEL-351P as a traditional line recloser control, it is only necessary to
access the EZ Level (Access Level E) Settings. See the SEL-351P
Manual Técnico for complete information regarding the full
functionality of the SEL-351P.
The following sections are covered in this documentation:
• Table of Contents • Settings
• Introduction • Testing
• Installation • Battery
• Communications • Specifications
• Front-Panel Interface
Safety Information
This Quick-Start Installation and User’s Guide does not cover all of the
possible conditions or circumstances that can occur during the
installation, operation, or testing of the SEL-351P. If additional
information is necessary to install, communicate with, or make settings
to the control that is not provided in this documentation, please refer to
the SEL-351P Manual Técnico or contact SEL for assistance.
This Quick-Start Installation and User’s Guide contains three types of
hazard statements:
CAUTION: indicates a potentially haza7rdous situation which, if not
avoided, may result in minor or moderate injury or equipment damage.
WARNING: indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
DANGER: indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
To Next Page
Loading...