Date Code 991201 Distributed Network Protocol (DNP) V3.00 H-5
SEL-351P Manual Técnico
FILL OUT THE FOLLOWING ITEMS FOR SLAVE DEVICES ONLY
Reports Binary Input Change Events when no
specific variation requested:
Never
Only time-tagged
Only non-time-tagged
Configurable to send both, one or the
other (attach explanation)
Reports time-tagged Binary Input Change
Events when no specific variation requested:
Never
Binary Input Change With Time
Binary Input Change With Relative
Time
Configurable (attach explanation)
Sends Unsolicited Responses:
Never
Configurable (attach explanation)
Only certain objects
Sometimes (attach explanation)
ENABLE/DISABLE UNSOLICITED
Function codes supported
Sends Static Data in Unsolicited Responses:
Never
When Device Restarts
When Status Flags Change
No other options are permitted.
Default Counter Object/Variation:
No Counters Reported
Configurable (attach explanation)
Default object 20
Default variation 6
Point-by-point list attached
Counters Roll Over at:
No Counters Reported
Configurable (attach explanation)
16 Bits
32 Bits
Other Value
Point-by-point list attached
Sends Multi-Fragment Responses: Yes No
In all cases within the device profile that an item is configurable, it is controlled by SEL-351P
settings.
O
BJECT
T
ABLE
The supported object, function and qualifier code combinations are given by the following object
table.
Table APPENDIX H: .2: SEL-351P DNP Object Table
Object
Request
(supported)
Response
(may generate)
Obj
*default
Var
Description
Func
Codes
(dec)
Qual
Codes
(hex)
Func
Codes
(dec)
Qual
Codes
(hex)
1 0 Binary Input - All Variations 1
0,1,6,7,8
1 1 Binary Input 1 0,1,6,7,8 129 0,1,7,8
1 2* Binary Input with Status 1 0,1,6,7,8 129 0,1,7,8
2 0 Binary Input Change - All Variations 1 6,7,8
To Next Page
Loading...