The software (firmware), schematic drawings, relay commands, and relay messages are copyright protected by the United
States Copyright Law and International Treaty provisions. All rights are reserved.
You may not copy, alter, disassemble, or reverse-engineer the software. You may not provide the software to any third party.
All brand or product names appearing in this document are the trademark or registered trademark of their respective holders.
Schweitzer Engineering Laboratories, Inc., SEL
OGIC
, and are registered trademarks of Schweitzer Engineering
Laboratories, Inc.
Copyright © SEL 1999 (All rights reserved) Printed in USA. This product is covered by U.S. Patent Numbers: 5,208,545;
5,317,472; 5,602,707; 5,515,227; 5,652,688; 5,349,490; 5,365,396; 5,041,737; 5,479,315; 5,731,943; 5,694,281; and U.S.
Patent(s) Pending. Foreign Patents issued.
SEL-351P Recloser Control Quick-Start Installation and User’s Guide 990430
To Next Page
Loading...