SEW-Eurodrive MOVIPRO Ethernet/IP - Page 172

13
Parameter setting
Parameterizing the power section "PFA-..."
Manual – MOVIPRO
®
with EtherNet/IP™ or Modbus/TCP Fieldbus Interface
172
7. Enter the download values of the drive parameters. Download values deviating
from the suggested values are highlighted in yellow. To accept all suggested
download values, click on the button [Apply proposal].
18589443723
8. Save the startup parameters.
9007201326616971
Setting Description
Download Transfers the startup parameters to the device.
Finish
Transfers the startup parameters to the device and
exits the startup.
16998413/EN – 12/2016