SEW-Eurodrive MOVIPRO Ethernet/IP - Page 176

13
Parameter setting
Parameterizing the communication and control unit "PFH-..."
Manual – MOVIPRO
®
with EtherNet/IP™ or Modbus/TCP Fieldbus Interface
176
No. Description
[6] Use this button to load an existing configuration from a file *.AppConfig.zip.
[7] Click this button to open the diagnostics interface with the following functions:
• Overview: Status of the device and module diagnostics
• PD‑Monitor: Process data monitor
• Trace: Recording of variables
• Advanced diagnostics: Current state of important data structures
Creating a new configuration
Proceed as follows:
1. In the Application Configurator, click [Create new configuration].
ð The configuration interface is displayed.
9007202824762635
No. Description
[1] The device type is displayed here.
16998413/EN – 12/2016