SEW-Eurodrive MOVIPRO Ethernet/IP - Page 42

6
Configuration and startup of EtherNet/IP™
Configuration of the EtherNet/IP™ master
Manual – MOVIPRO
®
with EtherNet/IP™ or Modbus/TCP Fieldbus Interface
42
11. Click [OK].
ð The following window is displayed.
[1]
[2]
15115056395
12. Open the tab [1].
13. Enter the cycle time (data rate) in the edit box [2]. The device supports a cycle
time of a minimum of 4 ms. Longer cycle times can be implemented without any
problems.
14. Click [OK].
ð The device is included in the project and the settings are adopted.
16998413/EN – 12/2016