SEW-Eurodrive MOVIPRO Ethernet/IP - Page 44

6
Configuration and startup of EtherNet/IP™
Configuration of the EtherNet/IP™ master
Manual – MOVIPRO
®
with EtherNet/IP™ or Modbus/TCP Fieldbus Interface
44
6. Click the [Create] button [3].
ð The following window is displayed.
16759276939
7. In the edit box [3], enter the name of the EtherNet/IP™ interface with which the
data are stored in the controller tags.
8. Enter the desired IP address of the EtherNet/IP™ interface field in the edit box [2].
9. Click the button [4].
ð The following window is displayed.
16759280651
16998413/EN – 12/2016