Maintenance
MCS100E Operating Instructions 8009504/VYWA7/V3-1/2018-01 © SICK AG 111
Subject to change without notice
7.9 Load Program from external PC
Loading files, e.g. new software revision:
PC at fiber-optics interface
Connect external PC to the optical interface of the MCS100E. The MCS100E operating
program must also be installed on the external PC.
Copy the files using the menu Specialist: Utilities: Receive/Send files from external PC.
PC to parallel interface
(For specially trained personnel, only)
Connect an external PC to the internal parallel interface of MCS100E using a “DOS-
Interlink” cable (connection cable with 11 cores) and copy files by means of a data
transfer program.
To Next Page
Loading...
Need help?
General
