Product description
16 MCS100E Operating Instructions 8009504/VYWA7/V3-1/2018-01 © SICK AG
Subject to change without notice
2.1 Product identification
The type plate is located on the top of the right side of the housing.
2.2 Description
The MCS100E measuring device is used for extractive continuous and selective
measurement of emissions (e.g.: HCl, NH
3
, H
2
O, CO, SO
2
, NO
x
) of incineration plants.
MCS100E can measure quasi-simultaneously up to 8 components (plus optionally O
2
) at
max. 12 sample points.
Figure 1 MCS100E
Product name: MCS100E
Manufacturer:
SICK AG · Rengoldshauser Str. 17A
88662 Überlingen · Germany
To Next Page
Loading...
