Specifications
134 MCS100E Operating Instructions 8009504/V YWA7/V3-1/2018-01 © SICK AG
Subject to change without notice
10.1 Conformity
The technical design of this instrument complies with the following EC
directives and EN standards:
• EU Directive LVD 2006/95/EC
• EU Directive EMC 2004/108/EC
Applied EN standards:
• EN 61010-1, Safety requirements for electrical equipment for measurement, control
and laboratory use
• EN 61326, Electrical equipment for measurement technology, control technology and
laboratory use - EMC requirements
For MCS100E in the emission measuring system MCS100E HW:
• EN 14181, Calibration of continuously operating emission measuring devices
• EN 15267-3: Certification of automatic measuring systems - Part 3
10.1.1 Electrical protection
• Insulation: Protection class 1 according to EN 61010-1.
• Insulation coordination: Measuring category II according to EN 61010-1.
• Contamination: The instrument operates safely in an environment up to contamination
level 2 according to EN 61010-1 (usual, non-conductive contamination and temporary
conductivity by occasional moisture condensation).
• Electrical power: The wiring system to the power source of the system must be installed
and fused according to the relevant regulations.
To Next Page
Loading...
Need help?
General
