Operation
MCS100E Operating Instructions 8009504/VYWA7/V3-1/2018-01 © SICK AG 67
Subject to change without notice
5.7.10 Specialist menus
The specialist level is used to program the measurement sequence (= the system) and to
perform software settings.
5.7.10.1 Password for the specialist level
To edit the specialist level, a password has to be entered.
The password input is not displayed on the screen.
Wrong entries in the specialist menu can have a disruptive effect on the
measurement sequence, lead to incorrect measurement results and may
damage internal and external system components.
Entries in the specialist menu may only be made by aptly trained personnel.
In the specialist level some menu options from the freely accessible Main
Menu are repeated. This is to avoid the time-consuming “jumping” from one
level to the other.
Definition of password:
→
p. 121, §9.1.3.1
To Next Page
Loading...
Need help?
General
