SICK S300

Chapter 12 Operating instructions
S300
120 © SICK AG • Industrial Safety Systems • Germany • All rights reserved 8010948/YY96/2016-02-17
Subject to change without notice
Technical specifications
12.4 Data sheet
Minimum Typical Maximum
General data
T
ype 3 (IEC 61496<1)
Safety Integrity Level
21)
SIL2 (IEC 61508)
SIL claim limit
2
1)
SILCL2 (EN 62061)
C
ategory Category 3 (EN ISO 13849<1)
Performance Level
2
1)
PL d (EN ISO 13849)
PFHd (T
a
mb
= 25 °C) (mean probability of a
dangerous failure per hour)
8 × 10
–8
T
M
(mission time) 20 years (EN ISO 13849)
Laser protection class Laser class 1
(according to IEC 60825<1 as well as
CDRH 21 CFR 1040.10 and 1040.11;
excluded are deviations due to Laser
Notice No. 50, dated 24.06.2007)
Enclosure rating IP 65 (EN 60529)
Protection class S300 Medium Range II (EN 50178)
Protection class S300 Long Range III (EN 50178 and EN 60950)
Ambient operating temperature –10 °C +50 °C
Storage temperature range –25 °C
–25 °C
+50 °C
+70 °C
(Z24 h)
Humidity (taking into account the ambient
operating temperature)
IEC 61496<1, section 5.1.2 and 5.4.2,
as well as
IEC 61496<3, section 5.4.2
Vibration IEC 61496<1 as well as IEC 61496<3
Frequency range 10 Hz 150 Hz
Amplitude 0.35 mm or 5 g
Shock resistance IEC 61496<1, section 5.1 and 5.4.4 as
well as
IEC 61496<3, section 5.4.4
Single shock 15 g, 11 ms
Continuous shock 10 g, 16 ms
21)
For detailed information on the safety design of your machine/system, please contact your local SICK
representative.
Tab.
35
:
Data sheet
S300