Siemens FS20 - Page 38

Project planning
of indication and operation devices
Operation and indication devices
5
38 | 242
Building Technologies
008843_v_en_
--
Fire Safety
2015
-
12
-
15
Operation and
indication devices
Connection Supply via Visibility (configurable)
20 zones EVAC-NL
operating add-on
[NL]
Station-internal bus Station-internal supply
4
20 zones, system-wide
FBA terminal [CH] Station-internal bus Station-internal supply
4
Same visibility as stations with FBA
terminal
Floor repeater
terminal
FDnet detector line ● ↑ Detector line
● External AC or DC
supply (optional)
3
● System-wide
● Max. five stations support a
system-wide configuration
Floor repeater
display
FDnet detector line ● Detector line
● External AC or DC
supply (optional)
3
● System-wide
● Max. five stations support a
system-wide configuration
Mimic display driver FDnet detector line ● Detector line
● External AC or DC
supply (optional)
3
System-wide
Mimic display driver
(EVAC)
Serial interface RS485
From the station or
external AC or DC
supply
3
System-wide
SintesoView
(Standalone)
Ethernet interface PC
Same visibility as the station which
is indicated using SintesoView
1
Sinteso Mobile Ethernet interface Smartphone ● System-wide
● Max. five stations support a
system-wide configuration
FBF [DE]
Fire brigade periphery
module or serial
interface RS485
Station-internal supply System-wide
FAT [DE] Serial interface RS485 Station-internal supply System-wide
Telecommunications
system via ESPA-
4.4.4 interface
Serial interface RS485 Station-internal supply System-wide
Table 4: Connection, power supply and visibility of the operation and indication devices
1
Only in conjunction with ↑ license key.
2
System-wide visibility is ensured when the station, or a component connected to
the station, has been configured for system-wide visibility (e.g. FT2010, FT2011,
printer or FAT).
3
Observe the notices provided for the corresponding components.
4
In the case of the FC2080, the supply is via the processor unit.