Siemens SIMATIC NET IE/AS-INTERFACE LINK PN IO User Manual

Contents
10
IE/AS−INTERFACE LINK PN IO as of hardware version 1, as of firmware version V2.0
Release 08/2018
C79000−G8976−C216−03
8.2.2.2 Get_Permanent_Parameter 151. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.2.3 Write_Parameter 152. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.2.4 Read_Parameter 153. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.2.5 Set_Permanent_Configuration 154. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.2.6 Get_Permanent_Configuration 155. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.2.7 Read_Actual_Configuration 156. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.2.8 Read_Parameter_String 157. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.2.9 Write_Parameter_String 158. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.2.10 Read_Diagnostic_String 159. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.2.11 Read_Identification_String 160. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.2.12 Write_CTT2_String 161. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.2.13 Read_CTT2_String 162. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.2.14 Read_I/O_Configuration 163. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.2.15 Read_ID−Code 164. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.2.16 Read_Extended_ID−Code_1 165. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.2.17 Read_Extended_ID−Code_2 166. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.2.18 Read_Status 167. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.2.19 Get_Write_Parameter_Echo 168. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.2.20 Write_Analog_Output_Data 169. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.2.21 Read_Analog_Input_Data 170. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.2.22 Read_AS-i_Slave_Errorcounters 171. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2.2.23 Read_and_Delete_AS-i_Slave_Errorcounters 172. . . . . . . . . . . . . . . . . . . . . . .
9 Diagnostics 173. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.1 Overview 173. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.2 Interrupts 173. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.2.1 Remove/Insert Module Interrupts 173. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.2.2 Diagnostic Interrupts 174. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.3 Diagnose Data Records 175. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10 Dealing with Problems / Error Displays 176. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.1 Replacing a Defective AS-i Slave/Automatic Address Programming 176.
10.2 Error Displays/Remedying Errors 177. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
A AS-Interface Protocol Implementation Conformance Statement (PICS) 180. . . . .
B References 184. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
C Notes on the CE Mark 185. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D Glossary 186. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D.1 Terms Relating to AS-Interface 186. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
D.2 Terms Relating to PROFINET 189. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Index 190. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Siemens SIMATIC NET IE/AS-INTERFACE LINK PN IO Specifications

General

Brand	Siemens
Model	SIMATIC NET IE/AS-INTERFACE LINK PN IO
Category	Control Unit
Language	English

Summary

Technical Description, Installation Guidelines, Operation

General Notes on Operation – Safety Warnings

Safety warnings and precautions for operating the IE/AS-i LINK module.

Uses of the Module

Overview of the IE/AS-i LINK's functionalities as PROFINET IO device and AS-Interface master.

Technical Specifications of the Module

Detailed technical specifications and data for the IE/AS-i LINK module.

Installation Guidelines and Installing the Module

Instructions for the correct installation and mounting of the IE/AS-i LINK module.

C-PLUG (Configuration Plug)

Information about the optional C-PLUG for saving configuration and project data.

Display and Control Elements

Explains the LED displays and their meanings for the IE/AS-i LINK and AS-i lines.

Settings when Using a Firewall

Notes and required port configurations for using firewalls with the IE/AS-i LINK.

Procedure – Configuration

What to do – an Overview

Provides an overview of the steps and preparations required before commissioning the IE/AS-i LINK.

Configuration Options

Outlines the four basic configuration methods available for the AS-Interface and the system.

Getting Started – Commissioning with STEP 7

Commissioning the IE/AS-INTERFACE LINK PN IO

Guides through the process of commissioning the IE/AS-i LINK using STEP 7, keypad, and display.

Keypad and Display

Configuration and Modes

Explains the two operating modes (Configuration and Protected) of the IE/AS-i LINK.

Buttons and Working in the Menus

Describes the functions of the keypad buttons and how to navigate menus.

Working Examples

Provides practical examples of common operations using the keypad and display.

Display / WBM Configuration

Web Based Management (WBM) with the IE/AS-i LINK

Introduction to using Web Based Management for configuring the IE/AS-i LINK.

Configuration and Diagnostics

Covers various configuration and diagnostic settings accessible via WBM.

Navigation “System –> System Configuration”

Details how to access and configure general system settings via keypad/display and WBM.

Navigation “System –> Reset”

Instructions for restarting or resetting the IE/AS-i LINK to factory settings.

Navigation “System –> Save & Download”

Options for saving configuration to a file or downloading data from a file.

Navigation “System –> Password”

Page for changing the password to access WBM.

Navigation “System –> Device Display”

Simulates the device LEDs to provide status information remotely.

Navigation “System –> Diagnostic >Buffer”

Accessing and managing the diagnostic buffer for troubleshooting.

Navigation “System –> C-PLUG”

Information on C-PLUG status and configuration data transfer.

Navigation “Industrial Ethernet -> Configuration”

Settings for IP parameters, DHCP, and SNMP for Industrial Ethernet.

Navigation “AS-i Line 1 -> Overview”

Provides an overview of detected AS-i slaves and their status.

Navigation “AS-i Line 1 -> Slaves”

Accesses detailed diagnostic and configuration information for individual AS-i slaves.

Navigation “AS-i line 1 -> Change Address”

Functions for changing AS-i slave addresses and ID codes.

Configuring with STEP 7 or a GSDML File

General Information on Configuration

Basic information and tools for configuring the IE/AS-i LINK.

Configuring with STEP 7

Step-by-step guide for configuring the IE/AS-i LINK using STEP 7.

Configuration with the GSDML File

Steps for configuring the IE/AS-i LINK using a GSDML file.

Data Exchange between PROFINET IO Controller and AS-i Slave

How the interfaces work

Explains how the PROFINET IO controller and AS-i slaves communicate via the IE/AS-i LINK.

Transferring AS-i Digital Values

Details how to access digital inputs and outputs of AS-i slaves using cyclic services.

Transferring AS-i Analog Values

How to access analog data using cyclic services.

Using the Data Record Interface

Data Record Interface of the IE/AS-i LINK

Explains how to control AS-i master response via user programs using data records.

Description of the AS-i Line and AS-i Slave Calls

Describes the calls that can be sent to the IE/AS-i LINK for configuration and control.

Diagnostics

Overview

Introduces the diagnostic options: interrupts and data records.

Interrupts

Categorizes interrupts into module and diagnostic types.

Remove/Insert Module Interrupts

Explains module remove/insert interrupts signaled via logical I/O or diagnostic address.

Diagnostic Interrupts

Details slave-specific and line-specific diagnostic interrupts.

Diagnose Data Records

How to read further diagnostic information using the data record interface.

Dealing with Problems / Error Displays

Replacing a Defective AS-i Slave/Automatic Address Programming

Simple replacement of failed AS-i slaves using automatic address programming.

Error Displays/Remedying Errors

Lists possible causes and remedies for errors indicated by LEDs.

AS-Interface Protocol Implementation Conformance Statement (PICS)

PICS for IE/AS-INTERFACE LINK PN IO

PICS document for the IE/AS-INTERFACE LINK PN IO, detailing master functions and supported profiles.

List of Master Functions Available

Describes available master functions and their implementation status.

References

Notes on the CE Mark

Glossary

Terms Relating to AS-Interface

Definitions of key terms and concepts within the AS-Interface system.

Terms Relating to PROFINET

Definitions of terms specific to the PROFINET communication protocol.