5 Display / WBM Configuration
97
IE/AS−INTERFACE LINK PN IO as of hardware version 1, as of firmware version V2.0
Release 08/2018
C79000−G8976−C216−03
5.2.16.3 Automatic Addressing
If you select this option, a new slave added to the AS-i line with AS-i address “0” is assigned
the next free address.
Disable this option once you have connected all required slaves.
Keypad/Display
AS-i Line 1 > Address help > enable/disable
WBM: “Automatic Addressing” Tab
Parameter Function
Automatic
addressing
Enables/disables addressing support
-
To Next Page
Loading...
