5 Display / WBM Configuration
55
IE/AS−INTERFACE LINK PN IO as of hardware version 1, as of firmware version V2.0
Release 08/2018
C79000−G8976−C216−03
5.2.1.2 Identification & Maintenance
Here, you can see various details of the IE/AS-i LINK for information and for
maintenance purposes.
You can also assign a plant-specific function tag and location tag for the IE/AS-i
LINK.
Keypad/Display
SYSTEM > Configuration > I&M > Manufacturer ID
Order ID
Serial number
HW revision
SW revision
Revision counter
Profile ID
Profile type
Version
Supported array
Function tag > enter... >
Location tag > enter... >
WBM: “I&M” tab (Identification & Maintenance)
Parameter Meaning
Function tag Function identifier
Location tag Location identifier
To Next Page
Loading...
