48
IE/AS−INTERFACE LINK PN IO as of hardware version 1, as of firmware version V2.0
Release 08/2018
C79000−G8976−C216−03
5 Display / WBM Configuration
This chapter...
In this chapter, you will see how to configure the IE/AS-i LINK using one of the two
options shown below:
S Keypad and Display
or
S Web Based Management (WBM)
The individual functions are introduced with both optional representations.
Note
At the start of the description of the individual pages, you will find the
corresponding command sequences for keypad and display. The command
sequences are indicated by rhe symbol shown on the left.
For some functions in the pages of Web Based Management (WBM), there is no
corresponding function when configuring with the display.
!
Warning
You can change the configuration of the IE/AS-i LINK during operation when there
is a connection to the PROFINET IO controller or write process data of the real
process.
The change in the configuration or to process data can trigger unexpected reac-
tions in the process that can lead to death, serious injury or damaged property.
Consider the consequences before you act. Take the following precautions:
S Restrict the ways of accessing the IE/AS-i LINK.
S Assign a secure password for access to Web Based Management.
S Install a physical emergency stop circuit for the machines or the process.
To Next Page
Loading...
Need help?
General
