4 Keypad and Display
41
IE/AS−INTERFACE LINK PN IO as of hardware version 1, as of firmware version V2.0
Release 08/2018
C79000−G8976−C216−03
S Saving entries
If you change values by entering alphanumeric characters, you can save them
by pressing the “OK” button. You then exit the menu and move up one layer in
the menu structure.
S Saving options
If, on the other hand, you change an option (check box) with the “OK” button,
so that a check mark appears or is cleared, the value is already saved and you
can exit the menu with the “ESC” button.
Example:
AS-i line 1 > Line status > Protected >
Autoprog. >
Offline >
S Navigation in lists (AS-i Line: Lifelist, Error List, Slave Info)
You can navigate through the lists from one slave to the next with the
“up”/“down” cursor buttons.
You can navigate from one list to the next with the “right”/“left” cursor buttons.
Display
If you make no further entries, the display changes to the “AS-i” logo following a
timeout. You can set the timeout time for the display with the following menu path:
SYSTEM > Configuration > Timeouts > Display >
To Next Page
Loading...
Need help?
General
