5 Display / WBM Configuration
69
IE/AS−INTERFACE LINK PN IO as of hardware version 1, as of firmware version V2.0
Release 08/2018
C79000−G8976−C216−03
WBM: “IP Configuration” Tab
Parameter Function
MAC address Shows the MAC address of the device.
IP address IP address of the IE/AS-i LINK. If you make a change here, this is automatically
updated in the display.
If the selected address is already occupied, the connection to the IE/AS-i LINK is
aborted.
Enter the previous address in the Internet browser to restore the connection.
Subnet mask Here, you enter the subnet mask of the IE/AS-i LINK.
Default Gateway Here, you enter the address of the default gateway.
DHCP Enables/disables the function with which the IE/AS-i LINK searches the network for
a DHCP server. If a DHCP server is found, the configuration is set according to the
data of the server.
You can choose between the following DHCP identification types:
S MAC address (default)
S PNIO device name (PROFINET device name)
S Client ID
To Next Page
Loading...
Need help?
General
