Siemens SINUMERIK 802D sl User Manual

System
8.7 SYSTEM - "Commissioning wizard" softkeys
Surface grinding
152 Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
&RPPLVVLRQ
LQJ:L]DUG
8.7 SYSTEM - "Commissioning wizard" softkeys
Note
The function " Commissioning wizard" is displayed if the machine manufacturer has
configured a commissioning dialog.
Procedure:
See the SINUMERIK 802D sl operating instructions for turning, milling, grinding, nibbling,
Chapter "Create commissioning dialogs" or on the toolbox, the example shown under
..\Special\ Commissioning wizard.
If an example has been saved on the CF card of the control, then the "Commissioning
wizard" function is active in the <SYSTEM> operating area.
Figure 8-46 Main screen system with active "Commissioning wizard" softkey
Press "Commissioning wizard".
Figure 8-47 Example of a commissioning dialog under "Commissioning wizard"

Siemens SINUMERIK 802D sl Specifications

General

Brand	Siemens
Model	SINUMERIK 802D sl
Category	Controller
Language	English