Siemens SINUMERIK 802D sl - User Log in - RCS Log in

Network operation
11.4 User log in - RCS log in
Surface grinding
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
305
$/$50
6<67(0

5&6
ORJLQ
11.4 User log in - RCS log in
For the Ethernet connections, you must first log on to the control system as a user.
In the <SYSTEM> operating area, select the "RCS Connect" softkey. The user log-in input
screen will appear.
Figure 11-2 User log-in
Logon
Type user name and password into the appropriate input fields and select the "Log in"
softkey to confirm your input.
After successful log-in, the user name is displayed in the Current user line.
Select the "Back" softkey to close the dialog box.
Note
This log-in simultaneously serves for user identification for remote connections.
Logoff
Press the "Log off" softkey. This will log out the current user, all user-specific settings are
saved, and any enables already granted are canceled.