Siemens SINUMERIK 802D sl User Manual

Part programming
7.2 Enter new program
Surface grinding
Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
89
1&
GLUHFWRULHV
1HZ
1HZ
GLUHFWRU\
1HZ
ILOH
;
$ERUW
7.2 Enter new program
Operating sequences
You have selected the PROGRAM MANAGER operating area.
Use the "NC directory" softkeys to select the storage location for the new program.
Press "New". You have the choice of the following options:
Figure 7-3 New program
After presssing the softkey "New directory" a dialog window will open up for setting up a new
file.
Enter a name and confirm with "OK."
After presssing the softkey "New file" a dialog window will open up for setting up a new
program file. in which you can enter the names of the new main programs and subprograms.
The .MPF extension for main programs is entered automatically. The .SPF extension for
subprograms must be entered along with the program name.
Conclude your entry with "OK". The new part program file will be created, and the editor
window is opened automatically.
Use "Cancel" to cancel the creation of the program. the window is closed.

Siemens SINUMERIK 802D sl Specifications

General

Brand	Siemens
Model	SINUMERIK 802D sl
Category	Controller
Language	English