Network operation
11.3 User management
Surface grinding
304 Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
Figure 11-1 User accounts
The user accounts serve for saving personal settings of the users.
A user account is required for communication between the control with the RCS802 tool on
the PC.
For this purpose, the user has to enter this password on the HMI during RCS log-in (see
User
log in - RCS log in (Page
305)) via the network.
This password is required also, if the user want to communicate with the control system from
the RCS tool.
Use the "Create" softkey to insert a new user into the user management.
When "Creating" a new account, enter the user name and the log-in password in the input
fields.
Use the "Delete" softkey to delete the selected user from the user management.
To Next Page
Loading...
Need help?
General
