Siemens SINUMERIK 802D sl User Manual

Network operation
11.9 Additional network functions
Surface grinding
314 Programming and Operating Manual, 11/2012, 6FC5398-5CP10-3BA0
&RQQHFW
&RQQHFW
Connecting network drives
The "Connect" function is used to assign a local drive to a network drive.
Note
You have shared a directory for a network connection with a certain user on a PC.
The RCS802 tool includes a detailed online help function. The procedure for using this help
function is described in Chapter "RCS802 share drive".
Figure 11-14 Connecting network drives
Sequences of operation for connecting network drives
1. Place the cursor on a free drive.
2. Change to the "Path" input field using the TAB key.
Specify the IP address of the server and the sharing name.
Example: \\157.163.240.241\
Press "Connect".
The server connection is connected with the drive of the control system.
Note
For example, for executing an external subprogram, please see Chapter "Automatic Mode" -
> "Execution from external".

Siemens SINUMERIK 802D sl Specifications

General

Brand	Siemens
Model	SINUMERIK 802D sl
Category	Controller
Language	English